[{"id":"comptia2201201-101","courseId":"comptia-220-1201","domain":"mobile-devices","topic":"Swollen laptop battery","prompt":"A technician opens a customer's laptop and finds that the lithium-ion battery pack is bulging and has lifted the touchpad. Which of the following should the technician do FIRST?","hint":"Safety comes before any repair or diagnosis.","explain":"Lithium-ion cells can swell from internal gas buildup, and a damaged cell may ignite or leak. Before touching any component, consider what stored energy and the damaged pack could do during the repair.","source":"https://www.comptia.org/en-us/certifications/a/core-1-v15/","interaction":{"type":"single"},"options":[{"id":"a","text":"Press the battery flat and run a full discharge and recharge cycle to recalibrate it","whyNot":"Incorrect: pressing or recalibrating a swollen cell can rupture it and does not fix the damaged cell."},{"id":"b","text":"Power off the laptop, unplug the AC adapter, and handle the pack as a hazardous item for safe removal and disposal","why":"Correct: removing power and following safe handling and recycling procedures reduces the risk of fire or leaking chemicals."},{"id":"c","text":"Replace the touchpad assembly because it is being pushed out of alignment","whyNot":"Incorrect: the touchpad is only displaced by the battery; replacing it first ignores the hazard."},{"id":"d","text":"Update the system firmware to correct the charging profile","whyNot":"Incorrect: firmware cannot repair a physically damaged cell and leaves the hazard in place."}],"answer":"b","explanation":"A swollen lithium-ion battery is a fire and chemical hazard. Power the system off, remove external power, and handle and dispose of the pack according to proper battery-handling procedures.","concept":"A swollen lithium-ion battery is a fire and chemical hazard. Power the system off, remove external power, and handle and dispose of the pack according to proper battery-handling procedures.","rev":1,"kind":"scenario","takeaways":["Puffy battery equals fire risk: shut down, disconnect, hazardous-waste drop-off."]},{"id":"comptia2201201-102","courseId":"comptia-220-1201","domain":"mobile-devices","topic":"Display cable fault","prompt":"A user reports that a laptop screen flickers and goes blank whenever the lid is moved, but an external monitor works normally. Which of the following is the MOST likely cause?","hint":"The symptom appears only when something physically moves.","explain":"The internal panel gets its video signal through a flat cable routed up through the hinge. An external monitor uses a separate port, so a fault on one path may not affect the other.","source":"https://www.comptia.org/en-us/certifications/a/core-1-v15/","interaction":{"type":"single"},"options":[{"id":"a","text":"A failed video RAM module on the motherboard","whyNot":"Incorrect: a GPU or memory fault would also corrupt the external display output."},{"id":"b","text":"A corrupted display driver","whyNot":"Incorrect: a driver problem would not depend on lid movement and would affect the external monitor as well."},{"id":"c","text":"An incorrect refresh rate in display settings","whyNot":"Incorrect: a refresh rate setting would not change with the lid position."},{"id":"d","text":"A loose or damaged display cable at the hinge","why":"Correct: the cable routes through the hinge, and movement-dependent flicker with a good external display points to it."}],"answer":"d","explanation":"The display cable passes through the hinge area, so repeated opening and closing can loosen or damage it, causing flicker or loss of the internal display.","concept":"The display cable passes through the hinge area, so repeated opening and closing can loosen or damage it, causing flicker or loss of the internal display.","rev":1,"kind":"scenario","takeaways":["The display cable runs through the hinge, so flicker or a dead internal screen points to a worn cable."]},{"id":"comptia2201201-103","courseId":"comptia-220-1201","domain":"mobile-devices","topic":"Backlight failure","prompt":"A laptop boots normally and the external monitor shows the desktop, but the internal screen looks black. Shining a flashlight at the panel reveals a very faint desktop image. Which of the following has MOST likely failed?","hint":"The image is being produced but can barely be seen.","explain":"An LCD panel does not emit light itself; it only filters light from a source behind it. Consider which part forms the picture and which part supplies its light.","source":"https://www.comptia.org/en-us/certifications/a/core-1-v15/","interaction":{"type":"single"},"options":[{"id":"a","text":"The digitizer","whyNot":"Incorrect: the digitizer handles touch input and does not affect whether the image is lit."},{"id":"b","text":"The video card","whyNot":"Incorrect: the external monitor works, so the graphics output is functioning."},{"id":"c","text":"The display backlight or its inverter","why":"Correct: the panel still draws the image, but without backlighting it is only visible with external light."},{"id":"d","text":"The CMOS battery","whyNot":"Incorrect: a depleted CMOS battery resets BIOS settings and time but does not dim the panel."}],"answer":"c","explanation":"A faint image visible under a flashlight means the LCD is working but the light source behind it (backlight, or its inverter or driver on older panels) has failed.","concept":"A faint image visible under a flashlight means the LCD is working but the light source behind it (backlight, or its inverter or driver on older panels) has failed.","rev":1,"kind":"scenario","takeaways":["Shine a light on a black screen: ghost image points at the backlight."]},{"id":"comptia2201201-104","courseId":"comptia-220-1201","domain":"mobile-devices","topic":"Digitizer","prompt":"A user's tablet screen displays the interface perfectly, but taps register in the wrong place and part of the screen does not respond to touch. Which of the following components is MOST likely faulty?","hint":"Consider which layer converts touch into input rather than producing the picture.","explain":"A tablet screen stacks a display panel under a separate sensing layer that reports finger positions. Consider which layer produces the picture and which one tells the system where a touch landed.","source":"https://www.comptia.org/en-us/certifications/a/core-1-v15/","interaction":{"type":"single"},"options":[{"id":"a","text":"Backlight","whyNot":"Incorrect: a backlight fault would make the screen dim or dark, not misread touches."},{"id":"b","text":"Digitizer","why":"Correct: the digitizer translates touches into input, so faults cause misplaced or missing touches while the image stays fine."},{"id":"c","text":"Accelerometer","whyNot":"Incorrect: it detects orientation and motion, not the location of a touch."},{"id":"d","text":"Wi-Fi antenna","whyNot":"Incorrect: the Wi-Fi antenna affects wireless signal, not touch input, and the display here already works perfectly."}],"answer":"b","explanation":"The digitizer is the touch-sensing layer. When it fails, the display can look normal while touch input is inaccurate or unresponsive.","concept":"The digitizer is the touch-sensing layer. When it fails, the display can look normal while touch input is inaccurate or unresponsive.","rev":1,"kind":"scenario","takeaways":["Display fine but touch wrong: suspect the digitizer."]},{"id":"comptia2201201-105","courseId":"comptia-220-1201","domain":"mobile-devices","topic":"Two-factor authentication","prompt":"A user signs in to their Apple Account on a new iPad and enters the correct password, but sign-in does not finish. Which of the following is also required to complete the sign-in?","hint":"The password alone proves one factor; think about what else proves the user holds something they own.","explain":"Authentication factors include something you know and something you have. Consider which item on the list belongs to the second group rather than being a hardware label or network key.","source":"https://support.apple.com/en-us/102660","interaction":{"type":"single"},"options":[{"id":"a","text":"A six-digit verification code shown on a trusted device or sent to a trusted phone number","why":"Two-factor authentication pairs the password with a code delivered to a device or number the user already trusts, which is what a first sign-in on a new device asks for."},{"id":"b","text":"The serial number printed on the back of the iPad","whyNot":"The serial number identifies hardware for support and warranty, and it is not an authentication factor for signing in to an account."},{"id":"c","text":"The passcode of the Wi-Fi network the iPad is using","whyNot":"The Wi-Fi key only authorizes joining the wireless network and has no role in verifying an Apple Account sign-in."},{"id":"d","text":"The PIN that protects the SIM card in the user's phone","whyNot":"A SIM PIN locks the cellular line after a restart; it is separate from account verification codes."}],"answer":"a","explanation":"Two-factor authentication requires the account password plus a verification code that appears on a trusted device or arrives at a trusted phone number.","concept":"Two-factor authentication requires the account password plus a verification code that appears on a trusted device or arrives at a trusted phone number.","rev":1,"kind":"scenario","takeaways":["Password alone is not 2FA; the second factor is a one-time code."]}]